There are many different landscaping ideas that can be implemented in order to beautify an otherwise mundane looking yard or patio area. One such way is installing a stream, pond, or water display. Using a pondless waterfall kit, you can create a beautiful scene that includes the sounds of natural water flow. The process takes some planning and time but is well worth the effort.
The beginning of the project requires mapping out how you want it to look and marking the yard. Once you have your plan, use bright spray paint to mark the areas that you need to dig. You will need to map out where the reservoir, or bottom, of the display will be, including where the pump will go.
Digging needs to happen where the pump will sit. You should use a vault to place the pump in so you can keep rocks and other objects from damaging the pump. Once you have a nice big area for the basin or reservoir, dig a deeper hole to place the vault in the lowest spot. This will allow it to be in a position to pump all the water back to the top without any water settling and not entering the pump. The reservoir area should be perfectly flat and level with the pump in the middle. Any dirt you dig out should be kept to help build up the top and fill in areas where the liner is exposed.
Using rubber liner, you will protect the ground where the water will flow. You want to cover the entire reservoir and where the stream will be. Once this is covered, place the vault in the hole. Using more than one layer of the liner will be helpful in protecting it from getting poked by the rocks and keeping the water from draining out into the yard.
The flexible tubing needs to be attached to the pump and run uphill to the place where the spillway will be installed. At this point, you can simply lay it on the ground. You should have enough dirt from digging that you will not need to dig a trench to cover the tubing.
You need to use large gravel to fill in the reservoir and then larger rocks to begin building the stream. These will be placed in various intervals along the rubber liner. The entire stream and system should be on top of the liner so you don't lose the water along the way. It will also keep the yard from being washed out. You are basically building a self-contained system.
Larger boulders and stones should be placed to create the path from the waterfall all the way to the reservoir. Once they are in place, you can begin to fill in with peat gravel and other decorative rocks to help make the scene. Before completely filling things in, you should attach the pump and spillway and run enough water through the system to get an idea where it will flow. Some adjustments may need to be made.
After everything is in place, continue filling in the stream with the rocks and cover the liner and tubing with the extra dirt. Several inches of dirt should be used to allow you to plant things along the path. Other items can be placed to help make it look more natural.
The beginning of the project requires mapping out how you want it to look and marking the yard. Once you have your plan, use bright spray paint to mark the areas that you need to dig. You will need to map out where the reservoir, or bottom, of the display will be, including where the pump will go.
Digging needs to happen where the pump will sit. You should use a vault to place the pump in so you can keep rocks and other objects from damaging the pump. Once you have a nice big area for the basin or reservoir, dig a deeper hole to place the vault in the lowest spot. This will allow it to be in a position to pump all the water back to the top without any water settling and not entering the pump. The reservoir area should be perfectly flat and level with the pump in the middle. Any dirt you dig out should be kept to help build up the top and fill in areas where the liner is exposed.
Using rubber liner, you will protect the ground where the water will flow. You want to cover the entire reservoir and where the stream will be. Once this is covered, place the vault in the hole. Using more than one layer of the liner will be helpful in protecting it from getting poked by the rocks and keeping the water from draining out into the yard.
The flexible tubing needs to be attached to the pump and run uphill to the place where the spillway will be installed. At this point, you can simply lay it on the ground. You should have enough dirt from digging that you will not need to dig a trench to cover the tubing.
You need to use large gravel to fill in the reservoir and then larger rocks to begin building the stream. These will be placed in various intervals along the rubber liner. The entire stream and system should be on top of the liner so you don't lose the water along the way. It will also keep the yard from being washed out. You are basically building a self-contained system.
Larger boulders and stones should be placed to create the path from the waterfall all the way to the reservoir. Once they are in place, you can begin to fill in with peat gravel and other decorative rocks to help make the scene. Before completely filling things in, you should attach the pump and spillway and run enough water through the system to get an idea where it will flow. Some adjustments may need to be made.
After everything is in place, continue filling in the stream with the rocks and cover the liner and tubing with the extra dirt. Several inches of dirt should be used to allow you to plant things along the path. Other items can be placed to help make it look more natural.
About the Author:
Get a summary of the factors to consider when choosing a pondless waterfall kit supplier and more information about a reputable supplier at http://www.boulderfountain.com/pondless-waterfall.html now.
No comments:
Post a Comment