Mulches are ground covers that are placed around shrubs, trees, and planted beds so that they can provide a layer on top of the bare ground. Several benefits are achieved by mulch. They include providing a layer over ground that is hard to irrigate, mow, or otherwise maintain. In cases of this kind, mulches find use in replacing turf or ground cover. When in need of Mulching York should be visited.
The productivity of mulches can only be realized if they are properly used. This means using them in the correct and expected manner. When underused no effect may be realized whereas overuse may have destructive results to plants. It is for this reason that there are various recommendations on how to use this material in different places. For instance, the layer must be kept at between 2 to 3 inches in well-drained soils.
This thickness should be measured after proper settlement of the mulches around plants. If there is drainage problem in the soil, the mulches should be used more conservatively to a thinner thickness. If course materials like pine nuggets are being used, then one can increase the thickness to around 4 inches. However, one should not exceed this thickness.
In case the ground already has mulch, it is important to check its depth before applying more. In case the thickness is already between 2 and 3 inches, it is important to keep it at that point and avoid adding more mulch. Mulches that are applied to a very thick layer of beyond 3 inches are referred to as volcano mulching.
Numerous negative effects are caused by volcano mulching on a plant. To begin with, it is responsible for preventing oxygen from accessing the roots of a plant. This hindrance in oxygen circulation usually results into stress to the roots before finally causing death. Avoiding placement of mulches against tree trunks and on top of root balls must be carefully observed at all times.
When mulching is done to a depth that is less than two inches on newly planted tree balls, the plants are usually stressed. What causes the stress is interception of the water by the mulch that would have reached the roots and used by the plant. Also, trunks of trees should not be mulched so that the tree can develop properly.
Most mulch sellers normally sell it in the form of cubic yards. Therefore, before setting out to purchase mulches, measuring the size of the area where it should be applied first is important. Measuring of the area should be done in square feet. Once measuring has been done, the depth one desires to lay mulches can be converted into feet.
If there is mulch that accidentally got applied on the trunk, it must be removed to allow free space of several inches from the trunk. Leaving the trunk covered in mulch normally results in moisture collecting around the trunk. The moist condition means that the trunk is left wet most of the time. This can result into rotting of the trunk.
The productivity of mulches can only be realized if they are properly used. This means using them in the correct and expected manner. When underused no effect may be realized whereas overuse may have destructive results to plants. It is for this reason that there are various recommendations on how to use this material in different places. For instance, the layer must be kept at between 2 to 3 inches in well-drained soils.
This thickness should be measured after proper settlement of the mulches around plants. If there is drainage problem in the soil, the mulches should be used more conservatively to a thinner thickness. If course materials like pine nuggets are being used, then one can increase the thickness to around 4 inches. However, one should not exceed this thickness.
In case the ground already has mulch, it is important to check its depth before applying more. In case the thickness is already between 2 and 3 inches, it is important to keep it at that point and avoid adding more mulch. Mulches that are applied to a very thick layer of beyond 3 inches are referred to as volcano mulching.
Numerous negative effects are caused by volcano mulching on a plant. To begin with, it is responsible for preventing oxygen from accessing the roots of a plant. This hindrance in oxygen circulation usually results into stress to the roots before finally causing death. Avoiding placement of mulches against tree trunks and on top of root balls must be carefully observed at all times.
When mulching is done to a depth that is less than two inches on newly planted tree balls, the plants are usually stressed. What causes the stress is interception of the water by the mulch that would have reached the roots and used by the plant. Also, trunks of trees should not be mulched so that the tree can develop properly.
Most mulch sellers normally sell it in the form of cubic yards. Therefore, before setting out to purchase mulches, measuring the size of the area where it should be applied first is important. Measuring of the area should be done in square feet. Once measuring has been done, the depth one desires to lay mulches can be converted into feet.
If there is mulch that accidentally got applied on the trunk, it must be removed to allow free space of several inches from the trunk. Leaving the trunk covered in mulch normally results in moisture collecting around the trunk. The moist condition means that the trunk is left wet most of the time. This can result into rotting of the trunk.
About the Author:
You can find an overview of the benefits you get when you use professional mulching York services at http://www.jmarlandscaping.com/services right now.
No comments:
Post a Comment